14 Dulwich St., Loganholme, Queensland, 4129, Australia
P07 3806 1944 (+617 3806 1944) F07 3209 7711 (+617 3209 7711)

 
  

  Click for home page Click for Sales Agents

The WOT ROT - Rot Repair Kit has been developed as an effective repair process for dealing with rot in all sorts of applications.  The only means of eliminating rot affected timber in the past, has been to cut out the damaged material and replace it with a new section of timber.  This is expensive and time consuming and in some cases almost impossible without dismantling large areas of a boat or house window and door frames.  The technique for carrying out a repair on rot affected timber varies depending on the extent of the damaged area, whether it is a structural section or a clear finish is desired when the repair is completed.

The detailed Instructions supplied with each kit describe four techniques for repairing Rot affected timber with the easiest being a Cosmetic Repair where the damage is superficial / shallow (Furry Timber).  BOTE-COTE Epoxy resin with the addition of TPRDA is poured onto the surface of the damaged area and allowed to soak in until the area is saturated.  The next technique is to Fill and Seal the Rotten Timber which is used where the area is not too large or is difficult to replace the rot affected timber.  A sharp implement is used to determine the extent of rot, as it will easily penetrate until solid timber is contacted.  Bote Cote with TPRDA added, is then injected into the holes until the rotten timber becomes saturated and will absorb no more epoxy resin.  The other two techniques involve removing all of the rot then filling with thickened Bote Cote epoxy or removing and replacing the timber.

The kit contains everything needed to carry out a repair using the techniques described including syringes, draw-up needles, gloves, measure cups as well as the Epoxy and TPRDA.  The key component of the kit is Timber Preservative Reactive Dilutant Agent (TPRDA) which was developed by BoatCraft Pacific for adding with Bote Cote Epoxy Resin.  It enables the Bote Cote to penetrate more effectively into the surface of timber (ask us for a copy of our brochure on Timber Saturation).  It also has a significant amount of additive which will kill rot spores it comes in contact with, thereby making it effective in eliminating rot in effected timber and sealing the timber to prevent further degradation. For larger repair jobs we can supply in bulk quantities and we look forward to discussing your requirements.
Kit contains
  • BOTE COTE Epoxy Resin Kit with Std. Hardener
  • Timber Preservative & Reactive Dilutant Agent (TPRDA)
  • Gluing & Filleting Powder
  • Stirring Sticks
  • Syringes
  • Draw-up needles
  • Gloves
  • Measure cup

As rot affected areas come in many shapes and sizes we recommend you contact us as we are bound to have a solution that meets your requirement.  

A recent repair job carried out by DRIVE Marine using the WOT ROT were heritage doors fitted to the Boatshed at the RAN Sailing Association at Rushcutters Bay in Sydney.  There was significant Rot damage to the bottom of the large boatshed doors and they wanted them restored to the original look . Click here to see the repair process.
‹— Before
After —›

Enquiries 

Please call Boatcraft Pacific 07 3806 1944 ( +617 3806 1944) for how to contact your nearest reseller.

Copyright Boatcraft Pacific Pty. Ltd.