NO-ROT is a unique solid wood
preservative used for the insitu treatment of timber to stop rot and
white ant attack. It is a concentrated mix of fungicide and
insecticide, combined together in a controlled release, small chalk
NO-ROT can be used to treat all outdoor timber
structures such as pergolas, timber decks, steps, fence posts and
rails, window frames, etc. which are exposed to weather and the
ingress of moisture. NO-ROT can also be used indoors where timber is
subjected to moisture such as in bathrooms.
Timber which has existing decay
can also be treated with NO-ROT to sterilise the timber and prevent
further attack. All timber species can be treated with NO-ROT. NO-ROT
will only be activated in the timber with a moisture content greater
than 20%. Timber treated in this situation will also resist termite
DIRECTIONS FOR USE
Drill one or two 9 mm (3/8 inch) hole
40 mm (1 3/4 inch) into the timber at the position where decay
commonly occurs. Insert one No-Rot into each hole and seal holes with
the wooden dowels supplied.
Under normal conditions the sticks
should be replaced every 5-10 years.
120 g/kg Boron
8 mm diameter x
30 mm long
STORAGE AND SHELF LIFE
Store in a cool dry place in the
original PVC container and out of the reach of children. NO-ROT sticks
have an indefinite shelf life.
Use synthetic rubber (PVC) gloves when
handling NO-ROT. May irritate the nose and throat. Avoid contact with
eyes and skin. Do not inhale dust. Wash hands after use.
If poisoning occurs, contact Doctor or
Poisons Information Centre (13 11 26).
Is swallowed give milk or calcium carbonate. Seek immediate medical
If in eyes, hold eyes open flood with water for at least 15 minutes
and see a Doctor.