Product Information Pages

14 Dulwich St., Loganholme, Queensland, 4129, Australia
P07 3806 1944 (+617 3806 1944) F07 3209 7711 (+617 3209 7711)

DESCRIPTION System Three QuickCure® is a 2-component, solvent-free epoxy/polymercaptan adhesive. Mixed in a 1-to-1 by
volume ratio, it will cure in five minutes, even at lower temperatures.

RESIN PROPERTIES:

Viscosity @ 25°C(77° F)................................ 12000 cps

Specific Gravity ............................................1.16

Color ................................................................... Clear

HARDENER PROPERTIES:

Viscosity @ 25°C(77° F) .................... 9000 cps

Specific Gravity ........................................... 1.13

Color ..........................................................Light Amber

MIXED SYSTEM PROPERTIES:

Mix ratio by weight resin/hardener...................................................... 100/97

Mix ratio by volume resin/hardene..................................................... 100/100

Working time @ 25° C............................................................ 2-3 minutes

Tack-free time @ 25° C.................................................................. 5 minutes

Coverage....................................................................................... 80 ft²/gal

TYPICAL CURED PROPERTIES:

Tensile Lap-Shear Strength(Aluminium/Aluminium), psi.............................2845

Heat Deflection Temperature, ° F........................................................ 101

Hardness (Shore D) 7 day cure @ 25C..................................................79

Hardness (Shore D) 7 day cure @ 25C (after 24 hr water immersion)....... 65

All tests were conducted in accordance with ASTM procedures.

Sizes available(kits): 8 oz. / 16 oz. / 32 oz. / 1/2-gallon / 1-gallon / 2-gallon / 10-gallon

For health and safety information concerning this product, please refer to the MSDS sheets for T-88 Structural Adhesive. MSDS sheets are available on our website at www.systemthree.com.

The information contained herein is based on the data available to us and is believed to be correct. However, System Three Resins, Inc. makes no warranty, expressed or implied, regarding the accuracy of these data or the results to be obtained from the use thereof. System Three assumes no responsibility for injury from the use of the product described herein.

Enquiries

Please call Boatcraft Pacific 07 3806 1944 ( +617 3806 1944) for how to contact your nearest reseller.