AUSSIE CLEAR is a penetrating exterior oil finish designed to be used where a non film forming treatment is required. It is ideal for protecting hardwood from the weather.  AUSSIE CLEAR will retain the natural beauty of the timber, repel moisture, prevent unsightly mould growth and prevent checking and splitting.  No film forms, so it will not peel or crack.  It contains a powerful mouldicide.  It is specially formulated for use on a broad range of  woods, especially the darker ones such as

Merbau, Cedar, Oregan, Jarrah, Cypress pine, Spotted Gum, Blackbutt.

Features

Powerful Mouldicide
Formulated pigment which appears clear on most woods but which provides UV protection.
Rich mix of natural oils.
Natural citrus smell.

Uses

Decking
Natural Weatherboards
Window Frames
Fencing
Pergolas
Outdoor Furniture

Directions For Use

Apply AUSSIE CLEAR dry surfaces, free from dirt grease and wax. Previously varnished or painted surfaces must be thoroughly stripped. Badly weathered surfaces should be sanded back or cleaned using a wood cleaner such as GREY DECK CLEANER. It can be applied by any convenient means, such as brush, roller, spray or dip application, however floors & decks are most easily applied with a lambs wool applicator. Apply one coat of AUSSIE CLEAR, working it into the timber. Any excess oil, remaining on the surface after one hour should be wiped off. If the timber still looks dry, another application may be required. Allow 24 hours for thorough drying.

Maintenance

Timber treated with carefully formulated wood finishes such as AUSSIE CLEAR will not blacken when maintained regularly. However, over time and depending on the severity of exposure, the rich colour of the timber will fade. Repeat applications are simple as the timber can be re-oiled to bring back the rich natural timber texture.

Coverage

Sawn timber approx 8-9 m2/Litre.

Dressed timber approx 11-12 m2/Litre