System Three T-88® is a 2-component, epoxy/polyamide adhesive. T-88 meets the requirements of the following product specifications: MIL-A-81236(OS), MMM-A-134 (1) and CID A-A-3053.

T-88® is a high performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modification in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders, and organizations.

T-88 has exceptional adhesion to most clean surfaces including wood, fiberglass, concrete, aluminum, steel and many plastics. (Recommendations for surface preparation methods are available on request). T-88 does not bond well to tin, zinc or waxy thermoplastics such as polyethylene. When fully cured, it is unaffected by water, oil, gasoline, and virtually all chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided the adhesive is worked well into the surface. Glue line thickness is not critical and clamping is not necessary if the joint is undisturbed during set-up of the adhesive.

T88 Technical Data Sheet.
T88 MSDS.