This is an inexpensive polyester peel ply which has a tight weave that is very drapable. Peelply is a light weight cloth which has been treated with a finish to prevent the resin adhering to it. After laying up your work, you smooth peel ply over it and squeegee it down allowing the excess resin to come through. Make sure the peel ply is very smooth. Then allow the resin to go hard and peel the peel ply off. You will be left with a surface which largely eliminates the need for a lot of sanding. It is approximately 54gsm has a thickness of 0.076mm and a full roll is 91 metres. This material is 1.524 metres wide, it must be folded to go through the post. which can crease the material.  Any more than a metre or so is too large to fold anyway.

Click here for the Data Sheet.