CoreLite® PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is characterized for its phenomenal screw retention and amazing resistance to moisture; it will not rot, mold or mildew. It is compatible with multiple resins and adhesives.
It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.
PROCESSING
• Hand lamination / spray lay-up
• Vacuum infusion
• Resin injection
• Adhesive bonding
• Pre-preg processing (up to 80 °C, 176 °F)
• Thermoforming
APPLICATIONS
Marine: hulls, decking, bulkheads, interiors superstructures
Transportation: floors, ceilings, doors, interiors, partition walls, sidewalls
Wind energy: rotor blades, covers, casings
Aerospace: fuselage and wind components, kitchen trolleys, galleys
Industrial: Covers, Containers, Tanks, Sporting goods, Tooling and Molds
PROPERTIES
| Density |
80kg/cuM |
|
Compressive Strength |
1.43MPa |
| Compressive Modulus |
68MPa |
|
Tensile Strength |
2.60MPa |
| Tensile Modulus |
137MPa |
|
Shear Strength |
1.13MPa |
| Shear Modulus |
29MPa |
|
Shear Elongation at break |
20% |
| Thermal Conductivity |
0.033 W/m.K |
|
Colour |
Green |
| Density Tolerance |
+/- 10% |
|
Water Absorption |
<1% |
| Processing Temperature |
80C |
|
|
|
Disclaimer: The information and data presented herein are subject to revision. CoreLite reserves the right to release replacement data. The data presented is derived from in house and independent testing. Calculations should be verified with physical test. The data is provided without liability to CoreLite or its agents and does not constitute warranty or representation in respect to the material or its use. To be used for information only.
Other PVC Foam core materials (Densisty 48kg/cuM to 130kg/cuM, Perforated and Grid Scored in 60kg/cuM and 80kg/cuM) can also be supplied.
This product was added to our catalog on Friday 07 October, 2022.
