6mm Marine Plywood 2440mm x1220mm made to BS1088. A Bond, 3 ply. AFS/PEFC Certified.
Malaysian Tropical Medium Light Hardwood.
This is genuine Marine Plywood made to conform to BS1088, not "Marine Grade" plywood which could probably better be described as exterior plywood. If no standard is quoted, then it probably doesn't conform to a standard.
Technical Specification
Thickness (EN 315:2000) |
6mm + 0.38 / - 0.58 |
Layup - 3 plys |
I-I |
Veneer Thicknesses |
0.6mm / 3.6mm / 0.6mm Nominal |
Length & Width Tolerance |
+- 3.5mm |
Squareness |
+-1mm/M |
Straightness |
+- 1mm/M |
Bond |
EN314-2 Class 3 (Formerly Weatherproof & Boil Proof) |
Formaldehyde |
Class E1 (EN13986 Annex B ) |
Density |
610kg/M3 (600 - 800 depending on timber species.) |
Sustainability |
AFS/PEFC Certified |
Notes
Transport of plywood is fraught with difficulty over long distances. We strongly recommend that you also purchase two 3mm MDF Sheets to act as protector sheets for your plywood. If your order weighs more than 30kg, please give some thought as to how it is going to be unloaded from the delivery truck.
All plywood photographs are typical of the type and size of plywood. Sheets vary within deliveries from one manufacturer and even more so between manufacturers. The relevant standards do permit considerable variation in construction and appearance. Sheet weight shown are calculated using an average to heavier than average density. Many sheets will weigh less. At times we may have to substitute a different brand of plywood. We will be careful to ensure it is of a quality equal to or better than that described here.
This product was added to our catalog on Wednesday 21 September, 2011.