Probably Iain's most popular design. The Tammie Norrie is an effortless, rewarding rowing machine for one or two rowers in tandem. The boat is not as flighty as some of Iain’s specifically rowing designs. Tammie Norrie is also an excellent load carrier, all of which suggests a handy picnic and camping boat and she sails well with any of the range of rigs offered in the plans.

Tammie Norrie is basically a traditional workboat of medium size; a type which happens to make a particularly useful and attractive recreational boat.

Type: Round bilged dingy;
LOA: 4.11m 13' 5";
Beam: 1.36m 4' 5";
Typical Weight: 77kg 170lbs;
Sail Area: 6.08 sqM to 7.53 sqM, 65 sq ft to 81 sq ft;
Sailing Rig: Lug, sloop or yawl;
Construction: Glued lap clinker plywood;
Building Time: 220 hours;
Plans 7 sheets with instructions.

Whats in the kit?
A basic kit specific instruction sheet. All the precut plywood components in BS1088 Gaboon ply (okoumme) and mdf molds, and stem aligners for the hull, and for larger boats - cabin furniture, cockpit seat components. NOTE: The planks have station and scarfing alignment holes. You still need to do some bevelling as you lay your planks up, some scarfing and geralds on the lands toward the bow in dinghies, and bow and stern in the double enders.
What else will I have to buy?
You still need to get solid timber for thwarts, miscellaneous framing and gunwales, and your building ladder frame/table. You still need to get epoxy resins packs and tools. we will soon have specific packs for each boat on this site. Materials for rudder and centreboard are additional. In the meantime, feel free to contact us.

Plans delivery is approximately 1 week. Kits take a couple of weeks.