TagLine Here

David Payne

  • 10M Motor Launch
    The distinctive design of the Queensland Moreton Bay cruisers and the Halvorsen cruisers from NSW has been incorporated into this motor launch commissioned from our Sydney based naval architect David Payne. With many appropriate semi protected waterways around Australia, this is an ideal boat for leisurely weekend and holiday cruising. The hull construction offers the alternatives of plywood with... The distinctive design of the Queensland Moreton Bay cruisers and the Halvorsen...
  • 8M Trailerable Motor Launch
    The distinctive design of the full size, live-aboard Queensland Moreton Bay cruisers and the Halvorsen cruisers from NSW has been transformed into this trailable motor launch commissioned from our Sydney based naval architect David Payne. With many semi protected waterways around Australia easily accessible by road, this is an ideal boat for leisurely weekend and holiday cruising at a variety of... The distinctive design of the full size, live-aboard Queensland Moreton Bay cru...
  • Alexander Beetle
    Alexander Beetle  is a one person tender, 1.650m x 0.970m x 400mm depth. It is built in 4mm plywood, 2 sheets, with 200gsm fabric on the exterior. The plan is one A1 size drawing for construction/arrangement and layout of panels on ply sheets.   Alexander Beetle  is a one person tender, 1.650m x 0.970m x 400mm depth. ...
  • 6.1m Double Sea Kayak, Plan or Laser Cut Kit.
    The 6.1m double sea kayak is a compact boat for easier car-topping. It is 650mm wide for good stability, and buoyant at the bow to help it lift over waves. The single chine construction is similar to the Yamba designs. A skeg is fitted for control but a rudder can be fitted if desired. It can be built with a weight of 25kgs. The kayak can be customised to suit individual requirements, for example... The 6.1m double sea kayak is a compact boat for easier car-topping. It is 650mm...
  • Jilly
    Jilly  is a 6 foot (1.83m) dinghy, built in 6mm plywood like her bigger sisters, the 2.0m and 2.3m versions. Jilly and the 2.0m dinghy come from two sheets of ply, the 2.3m dinghy uses 2&1/2 sheets of plywood. These boats can be rigged to sail and can carry a small outboard. Respective beam dimensions are 1.17m, 1.25 m and 1.26m. The plans include full size template sheets for... Jilly  is a 6 foot (1.83m) dinghy, built in 6mm plywood like her bigger si...
  • Little Stripper
    The Little Stripper  is a round bilge strip plank construction designs, using 6mm WR cedar planking and 200 gsm reinforcement on both skins. At 2.3m long, the Little Stripper is a dual purpose tender and sailing dinghy, It has a traditional appearance. Little Stripper's plans have a sheet for construction/arrangement and sheet of full size templates for mould stations and stem options. The Little Stripper  is a round bilge strip plank construction designs, us...
  • Yamba 5.5m Sea Kayak. Plan or Laser Cut kit.
    The Yamba sea kayak is a single chine hull made of 3mm or 4mm plywood with a 200gsm fabric sheathing on the exterior. It is 650mm wide which makes it very stable. A skeg is fitted for control but a rudder can be fitted if desired. It can be built to weigh under 20kgs. The kayak can be customised to suit individual requirements, for example hatches can be incorporated to carry equipment for long... The Yamba sea kayak is a single chine hull made of 3mm or 4mm plywood with a 20...
  • 2.75m Double Chine Dinghy
    Another plywood dinghy is the 2.75m double chine design. This is a big load-carrying dinghy, suitable as a tender for a larger yacht or launch. It can be rigged to sail and carry an outboard. Construction is 4mm ply and 200gsm fabric on the exterior. Plans include construction/arrangement, rig layout, and full size templates for mould stations and bulkheads. The picture  is a 2.75m dinghy... Another plywood dinghy is the 2.75m double chine design. This is a big load-ca...