Your cart is empty.
Surfboard Cloth & Tape
Products usually used by our surfboard making friends. They none the less can be sued in any composite construction as well
-
135gsm or 4 oz HiTensile EGlass 76cm Wide Plain Weave Cloth
Cloth width is 76 cm. Price is per metre. We will cut a piece to your desired length. This cloth is 135grams per square metre or 4 oz per square yard. The cloth is 76cm wide, which is 2 foot 6 inches wide approximately. This cloth is frequently used in surfboard manufacture, most often for short boards. 2 layers for the surfboard deck and one layer for the bottom. This cloth will give great... Cloth width is 76 cm. Price is per metre. We will cut a piece to your desired l... -
200gsm or 6oz HiTensile EGlass 76cm Wide Plain Weave Cloth
Cloth width is 76 cm. Price is per metre. We will cut a piece to your desired length. This cloth is 190grams per square metre or 6 oz per square yard. The cloth is 76cm wide, which is 2 foot 6 inches wide approximately. This cloth is often used in the manufacture of surfboards, especially for the larger boards. 2 layers for the surfboard deck (or perhaps 1 x 4oz plus 1 x 6oz) and one layer for... Cloth width is 76 cm. Price is per metre. We will cut a piece to your desired l... -
Carbon Fibre Rail Uni Directional Tape 65mm wide 200 gsm
This is a unidirectional tape which means that all the carbon fibres are aligned along the length of the tape. This tape thus has great strength along its length, but not a lot across its width. The tape is 65mm wide (2 1/2 inches approx) and is 200 grams per square metre which is about 6oz per square yard. On surefboards it is normally used around the edges of the board to increase the... This is a unidirectional tape which means that all the carbon fibres are aligned... -
Carbon-EGlass Hybrid Fibre Rail Plain WeaveTape 80mm wide 175 gsm
A Carbon/E-Glass hybrid tape which can enhance the appearance of your surfboard when placed under a cleaqr finish. We sell it by the metre. It comes on a full roll length of 50 metres and th tape is approximately 0.2mm thick. A Carbon/E-Glass hybrid tape which can enhance the appearance of your surfboard... -
Aramid 180 gsm 75mm Woven Tape
Plain Weave tape is constructed with the warp and weft forming a simple over-under criss-cross pattern. It is firm and stable, allows fair porosity, uniform in strength in all surface directions and is ideally suited for flat surface Fibre Aramid Product Type Woven Tape Construction Plain Density 180 g/m2 Width 75 mm Thickness 0.30 mm Finish Loomstate Plain Weave tape is constructed with the warp and weft forming a simple over-un... -
Kevlar Unidirectional Tape 210gsm 64mm wide
Woven unidirectional tapes consist of a plain weave construction with at least 90% of the fibre weight in the warp. This is used to add tensile and load bearing strength in one specific direction. All of our Kevlar UD tapes are designed and made for using real Kevlar® fibre from Du Pont and the best HiClear glass for maximum strength and clarity. This type of tape is most commonly used in EPS... Woven unidirectional tapes consist of a plain weave construction with at least ... -
Innegra Carbon Tape Plain Weave 160gsm 80mm Wide per metre
Combining Innegra for impact resistance and Carbon for stiffness, this attractive tape provides strength in all directions plus a great appearance under clear finishes. It is about 0.20mm thick and comes on a roll of 50 metres. (We sell any length b y the metre.) Combining Innegra for impact resistance and Carbon for stiffness, this attracti... -
Innegra Glass 150gsm Tape 80mmW per metre
Innegra features outstanding impact and compression strength properties. It is tougher and lighter than other available fibres. This tape combines Innegra with glass to produce a tape with a miuch improved (compared to plain Innegra) modulus. Innegra features outstanding impact and compression strength properties. It is ...