Your cart is empty.
Small Boat Fittings
Here you will find rowlocks, cleats, fair leads, drain plugs and rudder pintles and gudgeons. We hold these items in stock in Brisbane Australia for immediate delivery. These are made of polished gunmetal and they really do give a hint of class to the boat. You can either keep them polished or allow them to naturally form a lovely patina on their surface. Alternatively, most of the items can be chrome palted for a small aditional charge upon request.
-
Pillar Cleat 4"
This is a beautifully proportioned polished gunmetal cleat. It is 4" (100mm) long, has a base width of 7/8" (22mm) and has 3/16" (5mm) holes which accept an 8g screw. The length of screw in the cleat is 7/8" (22mm) so the screws will need to be the thickness of the timber plus 22mm less a little bit so they don't penetrate the other side. This is a beautifully proportioned polished gunmetal cleat. It is 4" (100mm) lo... -
Pillar Cleat 6"
This is a beautifully proportioned polished gunmetal cleat. It is 6" (150mm) long, has a base width of 1" (25mm) and has 7/32" (5.5mm) holes which accept an 8g screw. The length of screw in the cleat is 1 1/8" (28mm) so the screws will need to be the thickness of the timber plus 28m less a little bit so they don't penetrate the other side. This is a beautifully proportioned polished gunmetal cleat. It is 6" (150mm) lo... -
Cleat Open Top 4"
This is a beautifully proportioned polished gunmetal cleat. The open top is great as it can also be sued as an open fair lead. It is 4" (100mm) long, has a base width of 7/8" (22mm) and has 3/16" (5mm) holes which accept an 8g screw. The length of screw in the cleat is 7/8" (22mm) so the screws will need to be the thickness of the timber plus 22mm less a little bit so they don't penetrate the... This is a beautifully proportioned polished gunmetal cleat. The open top is gre... -
Deck Fairlead - Left Hand 4' Gunmetal
This fairlead is designed to go on the Port side near the bow of a small boat. It guides a mooring line or bow line so that the line leads cleanly onto the boat and to the mooring cleat or bollard. Possibly its most important task is to prevent the line chaffing the finish off the timber and waering the timber itself. It is usual to have a Left hand one on the port side and a... This fairlead is designed to go on the Port side near the bow of a small boat.&... -
Deck Fairlead - Right Hand 4' Gunmetal
This fairlead is designed to go on the Starboard side near the bow of a small boat. It guides a mooring line or bow line so that the line leads cleanly onto the boat and to the mooring cleat or bollard. Possibly its most important task is to prevent the line chaffing the finish off the timber and waering the timber itself. It is usual to have a Left hand one on the port side and... This fairlead is designed to go on the Starboard side near the bow of a small b... -
Rowlock and Socket 2" x 1/2"
Gunmetal rowlocks are a delightful addition to any fine rowing craft. This unit is made from polished gunmetal and has a jaw width of 2" (50mm) and a stem diameter of 1/2" (12mm). The screw holes in the socket accept either a 6 gauge or an 8 gauge screw. The main bore of the socket will need a hole drilled through the gunwale of 20mm (25/32") to house it. Ideally these should be... Gunmetal rowlocks are a delightful addition to any fine rowing craft. This unit... -
Lightweight Rudder Gear
This is made in polished gunmetal and it suits dinghies of up to about 8 foot (2.4m) long. It is sold as a set, consisting of two transom mount gudgeons and tow rudder pintles. The rudder pintles have an offset single strap, which can be fitted to one side fo a narrow rudder blade, or within a wider one. This is made in polished gunmetal and it suits dinghies of up to about 8 foot (... -
Drain plug 12mm Gun Metal
Cast in gunmetal with a washer fitted. If leaving a dinghy or launch afloat, this fitting does allow for a positively closed drain. Bore 1/2" (12mm) Cutout Dia 3/4" (19mm) Flange Diameter 15/8" (42mm) Hull Thickness 5/16" (8mm) Cast in gunmetal with a washer fitted. If leaving a dinghy or launch afloat, th...
